This fun Wood Spirit is a relief carving worked deeply into a 4 quarter (1") basswood.  Basswood is a wonderful wood for detailed carvings because of it's soft tight grain but it has little or no color characteristics to enhance the finished work.  Unlike walnut or butternut, basswood tends to be a very flat off white color throughout the wood.  So we will be working on a simple, easy and fun technique to create a colorful wood grained effect using acrylic paints as a base coat and oil paints as a staining coat.  Once the wood grain effect has been achieved we will add a small amount of coloring for the face and dry brush the hair.  This is a great painting technique to use with our Fun Wood Spirits Pattern Package.

Since this is a tutorial on the painting steps we will just look at a brief over view of the carving stages. There are several tutorials on basic carving on this site that go into depth in how to carve a relief carving.  These links are directly below the tracing and levels patterns.

This Tutorial is perfect for use with:
Wood Spirit Mega Pattern Package
Water Spouts and Knockers Pattern Package 
Fun Wood Spirits and Greenmen Pattern Package

For 3-Dimensional Wood Spirit Carving:
Carving the Wood Spirit Image Tutorial
Wood Spirit Carving eProject
          

Click for Close Up
    

Begin this project by tracing your pattern to the basswood blank.  With either a band saw or scroll saw cut out the basswood along the outline of the wood spirit.  You do not need to cut every little v shape along the hair lines. 

Cut only the larger v's, the small ones can be cut during the carving stage with your v-gouge. Once the project has been cut break the design down into levels for easy rough out work.

Next round over each section of the work and add your v-gouge texturing.  Finish the work with a light sanding, if needed, using 220 grit sandpaper or higher.  Please see the links below for a more detailed look at relief carving techniques.

On the Close Ups of these side views you will see the dark shadows cast on the wall from the  carving.  Once the front side of the wood spirit was completed I turned this project over to work on the back.  I carved the outer edges of each section of hair so that there would be a space between the hair tips and the wall.  This creates a nice shadowing for your wood spirit when he is hung.

For tutorials on relief wood carving please see:
Introduction to Landscapes in Relief Carving
Basic Round Over Carving
Low Relief Sailboat Wood Carving Scene

For tutorials on working in levels in relief carving please see:
Simplifying a Pattern 
Working with Levels

For other fun techniques to color your carvings please see:
Watercolors & Wood Burning  
Adding Skin Colors with Watercolors
Dry Brushing Acrylic Paints over Oils 
     
        

RETURN TO HOME PAGE